MKC TOOLS Variable speed DC Motor units for 10E/ER Shopsmith This is an example of what you can have for your 10ER. Nice Pacific Scientific high end treadmill motors with a KB motor controller mounted for use on the 10ER Shopsmith or just about any drill press. Both are lightly used and in excellent condition. The motors vary in HP and RPM and most are treadmill duty with a standard 5/8" shaft so your standard 10ER motor pulley will fit. The rpm range varies depending on the motor and you still have your three step pulleys to customize the speed range to suit your needs. It is completely assembled, wired with a 8' 14 ga. power cord and comes with new mounting hardware ready to mount on your 10E/ER machine or drill press. Call or email for availability. Extras available: new belt 11.50 new balanced pulley 39.50 locking reverse switch installed 39.50 Digital tach installed 95.00 extra power cord length per/ft. 1.50 cooling fan install (some units) 65.00 Looks similar to this one when mounted Contact by Email skip@mkctools.com  Or Call 817-319-2297 ---                                                                   MKC Tools Home